- HP-870N is characterized at full range over current protection,low power consumption,stable performance and anti-dropping capacity.
- Auto ranging clamp multimeter with AC/DC current, AC/DC voltage, resistance, capacitance, temperature, frequency, diode test, continuity test,Inrush Current Test,Relative Value
- Jaw opening measures AC current in a conductor up to 45mm without interrupting the circuit.
- Features Data Hold, Max/Min Reading, Backlight, an easy-to-read large LCD.
- Comes with a handy carrying pouch - Perfect for use while on the go.
- HP-870N can be widely used in home,school,smelting,communications, manufacturing,petroleum refining industry,national defense,electricity and chemical industries,etc.
★Conform to the IEC61010-1 & IEC61010-032 standard
★Double insulation (protection class 600V CAT III and pollution degree 2)
★The over-molding rubber case protects the meter to be stronger
★Auto Range/True RMS
★DC/AC Voltage Test
★DC/AC Current Test
★Test Diode Test/Continuity Buzzer
★Back Light/Data Hold
★Auto Power Off
★Inrush Current Test
★Temperature Unit Select
★Min Max/ Relative Value
★Resistance/ Capacitance/ Temperature/ Frequency/ Duty Cycle Test
Display: 6000 counts
DC current: 200A/1000A ±3.0%
AC current: 200A/1000A ±3.0%
DC voltage: 600mV/6V/60V/600V/1000V ±0.8%
AC voltage: 600mV/6V/60V/600V/750V ±1.0%
Resistance: 600Ω/6kΩ/60kΩ/600kΩ/6MΩ ±1.8%, 60MΩ ±3.5%
Capacitance: 9.999nF/99.99nF/999.9nF/9.999uF/99.99uF/999.9uF/9.999mF/999.99mF ±2.5%
Temperature: -20~1000℃ ±2℃ / -4~1832℉ ±2.5% of rdg
Frequency: 9.999Hz/99.99Hz/999.9Hz/9.999kHz/99.99kHz/999.9kHz/9.999MHz ±2.50%
Duty cycle: 0.1%~99.9% ±3.0%
Continuity checking with buzzer
MAX.Diameter for conductor: 45mm
Power: 9V(6F22)*1 (not included)
Size: 225mm x 97mm x 40mm
- HoldPeak HP-870N Digital Clamp Multimeter x1
- English Manual x 1
- Test Leads x1
- Temperature Test Probe x 1
- Carrying Bag x 1